T3 Terminator muzzle brakes are designed for .223 to 338 Magnums on barrels up to 25mm diameter.
The standard T3 threads are ½ x 28, 9/16 x 28, 5/8 x 24, 28 & 32, M15, 16, 17, 18 x 1, M18x1.5, 11/16 x 24, ¾ x 24.
The T3 doesn’t have a top or bottom, it has flats for a spanner and a small indexing mark so they can be easily fitted by the Gunsmith.
Ports are 90 degrees to the ground to reduce disturbance. The ports are angled back away from the shooter to minimise shooter discomfort and maximise performance.
The standard through hole is for .244 & requires opening up to 0.025-0.030″ over calibre size when fitted to larger calibres.
It is recommended the rear of the brake be tapered down to the muzzle diameter.
The T3 is 25mm, 0.984” diameter, 69mm, 2.72” long & weighs 90-115 grams, 3.17-4.05 oz depending on thread.
T3 between 308, 7mm Rem Magnum & 338 Lapua Magnum.

T3 between 308, 7mm Rem Magnum & 338 Lapua Magnum.

 

T3 on a Proof Research Barrel

T3 on a Proof Research Barrel

T3 with 338 Lapua Magnum with 300 SMK above it and 300 RUM with 230 Berger below it

T3 with 338 Lapua Magnum with 300 SMK above it
and 300 RUM with 230 Berger below it

T3 on a Christensen arms carbon barrel

T3 on a Christensen arms carbon barrel

T3 on a Christensen arms carbon barrel