T1 Terminator muzzle brake is designed for .223 to 300 Winchester Magnums on barrels up to 17mm diameter
The T1 dimensions are, 17.2mm, 0.677” diameter, 50mm, 1.96” long, 35-40 grams, 1.23-1.41 ozs
The T1 standard threads are, 7/16 x 28 for Kimbers, M13 x 0.75 & M13 x 1.25 for Brownings & ½ x 28 for custom applications
The M13 x .75 has a .308 compatible through hole. The M13 x 1.25 has a .284 compatible through hole
The standard through hole is for a .224 & requires opening up to 0.025-0.030″ over bore size if used on larger calibres up to a maximum of 30 cal.
The T1 doesn’t have a top or bottom, has flats for a 15mm spanner so they can be easily fitted by a Gunsmith.
Ports are 90 degrees to the ground to reduce disturbance. The ports are angled back away from the shooter to minimise shooter discomfort and maximise performance.
It is recommended the rear of the brake be tapered down to the muzzle diameter when fitting.
The T1 Terminator with factory 7mm Rem Mag above it & factory 308 below it
A T1 Terminator on a Kimber Mountain Ascent.
T1 Terminator on a Weatherby Ultra Light.